Addastone Plus
Resin Bonded Surfacing
The Addastone Plus Resin Bonded Surfacing System is a scatter system that provides an attractive, hard wearing and low maintenance surface by bonding or fixing loose gravel aggregates to concrete, asphalt, wood or metal.
The product offers ...
The Addastone Plus Resin Bonded Surfacing System is a scatter system that provides an attractive, hard wearing and low maintenance surface by bonding or fixing loose gravel aggregates to concrete, asphalt, wood or metal.
The product offers the look of loose gravel without the issue of migrating stone and is available in a selection of natural aggregates.
The application process differs from a hand screeded, resin bound installation. A layer of resin applied to a suitable surface laid to falls and covered with loose aggregate. Once cured, the remaining loose stones are swept away to provide a bonded paving that resembles the . Thickness is governed by aggregate size. i.e. 1-3mm aggregate will have a nominal depth of 4mm.
Unlike resin bound paving, Addastone Plus resin bonded surfacing is non porous. However, it is not completely impermeable so would still require an additional waterproofing membrane for use on podium decks and terraces.
Addastone Plus is suitable for commercial and domestic use on car parks and access roads, driveways, pathways, courtyards, patios, with a life span of up to 5-15 years depending on use. Hard wearing, low maintenance, good slip resistance, decorative and a natural looking alternative to loose aggregate without the maintenance issues.
A wide range of natural and recycled aggregates are available, making it ideal for heritage sites, landscaping schemes, public parks, universities and visitor attractions. A decorative surfacing alternative to block paving, tarmac, and concrete finishes.
Resin bonded gravel surfaces are very resilient. However, life spans will depend on usage and choices of aggregate. Typical examples of expected lifespan are as follows:
- Footpaths using a 1-3mm Autumn Quartz: 8-15 Years
- Domestic Drive using a 1-3mm Chinese Bauxite: 8-15 Years
- Car Parks using a 1-3mm Guyanan Bauxite: 5-10 Years
- Roads using 1-3mm Chinese Bauxite 5- 8 Years
Application
The improved Addastone Plus installation process replaces the need for a sealer with a process of Vacuum Assisted Captive Shot Blasting of the asphalt surface to remove dirt and residue. This enhanced preparation method ensures a good key for the resin bonded system and reduces installation time on site.
Addastone Plus
Resin Bonded Surfacing
The Addastone Plus Resin Bonded Surfacing System is a scatter system that provides an attractive, hard wearing and low maintenance surface by bonding or fixing loose gravel aggregates to concrete, asphalt, wood or metal.
The product offers ...
The Addastone Plus Resin Bonded Surfacing System is a scatter system that provides an attractive, hard wearing and low maintenance surface by bonding or fixing loose gravel aggregates to concrete, asphalt, wood or metal.
The product offers the look of loose gravel without the issue of migrating stone and is available in a selection of natural aggregates.
The application process differs from a hand screeded, resin bound installation. A layer of resin applied to a suitable surface laid to falls and covered with loose aggregate. Once cured, the remaining loose stones are swept away to provide a bonded paving that resembles the . Thickness is governed by aggregate size. i.e. 1-3mm aggregate will have a nominal depth of 4mm.
Unlike resin bound paving, Addastone Plus resin bonded surfacing is non porous. However, it is not completely impermeable so would still require an additional waterproofing membrane for use on podium decks and terraces.
Addastone Plus is suitable for commercial and domestic use on car parks and access roads, driveways, pathways, courtyards, patios, with a life span of up to 5-15 years depending on use. Hard wearing, low maintenance, good slip resistance, decorative and a natural looking alternative to loose aggregate without the maintenance issues.
A wide range of natural and recycled aggregates are available, making it ideal for heritage sites, landscaping schemes, public parks, universities and visitor attractions. A decorative surfacing alternative to block paving, tarmac, and concrete finishes.
Resin bonded gravel surfaces are very resilient. However, life spans will depend on usage and choices of aggregate. Typical examples of expected lifespan are as follows:
- Footpaths using a 1-3mm Autumn Quartz: 8-15 Years
- Domestic Drive using a 1-3mm Chinese Bauxite: 8-15 Years
- Car Parks using a 1-3mm Guyanan Bauxite: 5-10 Years
- Roads using 1-3mm Chinese Bauxite 5- 8 Years
Application
The improved Addastone Plus installation process replaces the need for a sealer with a process of Vacuum Assisted Captive Shot Blasting of the asphalt surface to remove dirt and residue. This enhanced preparation method ensures a good key for the resin bonded system and reduces installation time on site.
Exclusive range of aggregate finishes
System features & benefits
Aesthetically Pleasing
Durable
Low Maintenance
Slip Resisitant
Fast Application
Fixed stone
This system is best for:
Car parks and Access Roads
Pathways
Driveways
Balconies
Podium decks and Roof Terraces
Bridges and Ramps
MAKE SURE YOU GET THE RIGHT RESIN SOLUTION FOR THE JOB
Get in touch to discuss your project
System build-up and technical documents
Resources to help you with your choice of surfacing product
Surface Course
Addastone PLUS Resin Bonded - Typical depth 5-7mm depending on aggregate size
Binder Course
Base Course of 50-60mm AC20 Dense Bin 100/150
Plus
A 25-30mm AC6 Dense Surf 100/150 (+/- 6mm). Laid by others in well compacted layers to minimum fall of 1:40 to 1:60.
Vacuum Assisted Captive Shot Blasting to remove dirt and residue from the surface to ensure a good key.
Sub Base
Sub-base: Should be 100-150mm
(minimum 100mm) or as specified for the
site conditions by a qualified engineer
Membrane
If required
Sub Grade
Existing
Surface Course
Addastone PLUS Resin Bonded - Typical depth 5-7mm depending on aggregate size
Binder Course
60-70mm AC20 Dense Bin 100/150
Plus
A 30mm AC6 Dense Surf 100/150 or AC10 Dense Surf 100/150 (+/- 6mm) Laid by others in well compacted layers to minimum fall of 1:40 to 1:60.
Vacuum Assisted Captive Shot Blasting to remove dirt and residue from the surface to ensure a good key
Sub Base
Sub-base: Should be 100-150mm (minimum 100mm) or as specified for the site conditions by a qualified engineer
Membrane
As required
Sub Grade
Existing
Surface Course
Addastone PLUS Resin Bonded - Typical depth 5-7mm depending on aggregate size
Binder Course
120mm AC20 Dense Bin 100/150
Plus
A 30-40mm AC6 Dense Surf 100/150 or AC10 Dense Surf 100/150 (+/- 6mm) Laid by others in well compacted layers to minimum fall of 1:40 to 1:60.
Vacuum Assisted Captive Shot Blasting to remove dirt and residue from the surface to ensure a good key.
Sub Base
Sub-base: Should be 100-150mm (minimum 100mm) or as specified for the site conditions by a qualified engineer
Membrane
As required
Sub Grade
Existing
Surface Course
Addastone PLUS Resin Bonded - Typical depth 5-7mm depending on aggregate size
Binder Course
100-200 mm AC32 Dense base/Bin 100/150
Plus
A 30-40mm AC6 Dense Surf 100/150 or AC10 Dense Surf 100/150 (+/- 6mm) Laid by others in well compacted layers to minimum fall of 1:40 to 1:60.
Vacuum Assisted Captive Shot Blasting to remove dirt and residue from the surface to ensure a good key.
Sub Base
Sub-base: Should be 100-150mm (minimum 100mm) or as specified for the site conditions by a qualified engineer
Membrane
As required
Sub Grade
Existing
Surface Course
PU Addastone Plus Resin Bonded at typical depth 5mm using 1-3mm aggregate size
EP Addastone primer approx depth 0.3-0.5mm which has been scattered with quartz grit and left to cure to provide key.
(Coverage of quartz grit 50-70% of primer surface}
Binder Course
Concrete Course at a depth as required to take expected traffic loading.
Prepare concrete surface by Vacuum Assisted Diamond Grinding or Shot Blasting
Do not apply Addastone Plus system over movement joints. Ideally, joint material should be placed after application of the Addastone Plus system.
Sub Base
As required
Membrane
As required
Sub Grade
Existing
Take a look at the projects Addastone Plus works best in
Frequently Asked Questions
What’s The Difference Between Resin Bound And Resin Bonded?
Are our resin surfacing systems solvent free?
Is Resin Bonded Surfacing Suitable For Driveways
What Does Resin Bonded Surfacing Cost?
What’s The Lifespan Of Resin Bonded Surfacing?
- Footpaths using a 2-5mm Brittany Bronze: 8-15 Years
- Domestic Drive using a 1-3mm Chinese Bauxite: 8-15 Years
- Car Parks using a 1-3mm Guyanan Bauxite: 5-10 Years
- Roads using 1-3mm Chinese Bauxite 5- 8 Years
STILL HAVE QUESTIONS? CALL OUR TEAM OF SPECIALISTS NOW
We are ready to help you with your project
Need Project Support?
You may recognise us from...
Awards, Accreditations & Certifications
Registered Office: Addagrip House, Bell Lane Industrial Estate , Uckfield , East Sussex , TN22 1QL
Registered in England & Wales – Reg No. 1492055 – VAT No. 315993925
