Addastone TP

Resin Bound Tree Pit Surfacing

Addastone TP is a resin bound system designed to provide an attractive and aesthetically pleasing porous paving for tree pits, using a variety of natural or recycled aggregates.

Available in a UV stable Polyurethane, the resin binder ...

Addastone TP is a resin bound system designed to provide an attractive and aesthetically pleasing porous paving for tree pits, using a variety of natural or recycled aggregates.

Available in a UV stable Polyurethane, the resin binder is mixed with our range of natural or recycled aggregate with a typical grading of 6-10mm. The open texture achieved provides a highly porous resin bound surface, allowing the tree roots access to both air and water penetration.

Suitable for decorative tree pits and tree planting areas in pavement schemes subjected to light foot traffic when installed at recommended depths.

As Addastone Tree Pit installations are installed flush with the surrounding paving areas they have the added advantage of not becoming a litter trap that can occur with traditional tree grilles.

If you are looking for a more flexible surface for pedestrian tree pit schemes, take a look at our new Addaflex-R recycled rubber and aggregate product – a suitable resin bound alternative system for Tree Pits

+ Read More

Addastone TP

Resin Bound Tree Pit Surfacing

Addastone TP is a resin bound system designed to provide an attractive and aesthetically pleasing porous paving for tree pits, using a variety of natural or recycled aggregates.

Available in a UV stable Polyurethane, the resin binder ...

Addastone TP is a resin bound system designed to provide an attractive and aesthetically pleasing porous paving for tree pits, using a variety of natural or recycled aggregates.

Available in a UV stable Polyurethane, the resin binder is mixed with our range of natural or recycled aggregate with a typical grading of 6-10mm. The open texture achieved provides a highly porous resin bound surface, allowing the tree roots access to both air and water penetration.

Suitable for decorative tree pits and tree planting areas in pavement schemes subjected to light foot traffic when installed at recommended depths.

As Addastone Tree Pit installations are installed flush with the surrounding paving areas they have the added advantage of not becoming a litter trap that can occur with traditional tree grilles.

If you are looking for a more flexible surface for pedestrian tree pit schemes, take a look at our new Addaflex-R recycled rubber and aggregate product – a suitable resin bound alternative system for Tree Pits

+ Read More

Exclusive range of 7 blends

System features & benefits

Low maintenance

No issues with loose aggregate, soil displacement or collection of litter

Porous

Allows water to drain through to tree roots

Range of decorative aggregate blends

Natural or urban colour palettes

No loose aggregate

To stop issues of migrating aggregate or removal of stones in public places

Good slip resistance

Safe surface for urban tree pit in pavements

This system is best for:

Rural tree pits

For mature trees in parks and public gardens

Pavement tree pits

Where part of an urban street scheme

Decorative tree pits

Integrated as part of a pedestrian surfacing scheme

Tree root protection areas

To protect spreading root systems close to the surface

Newly planted tree schemes

To protect newly planted trees and allow additional access tube for additional watering

MAKE SURE YOU GET THE RIGHT RESIN SOLUTION FOR THE JOB

Get in touch to discuss your project

System build-up and technical documents

Resources to help you with your choice of surfacing product

Base Build Up Addastone TP Tree Pit

Frequently Asked Questions

What’s The Difference Between Resin Bound And Resin Bonded?

There are two different systems that use resin to fix gravel aggregates to create decorative surfacing. These are Resin Bound porous paving and Resin Bonded paving and whilst similar in name they have different properties, application methods and aesthetics. Resin bound surfacing consists of aggregate mixed with resin in specific blends using specific aggregate to resin ratios. The material is trowelled down to a smooth finish similar to a screed (with no loose stones). Depths are specified depending on aggregate size, normally 12mm, 16mm, 18mm or 24mm. Resin bonded surfacing is a scatter system which provides texture and the appearance of loose gravel. A layer of resin is applied to a suitable surface laid to falls and covered with loose aggregate. Once cured the remaining loose stones are removed. Thickness is governed by aggregate size. i.e. 1-3mm aggregate will have a nominal depth of 4mm.

STILL HAVE QUESTIONS? CALL OUR TEAM OF SPECIALISTS NOW

We are ready to help you with your project

Need Project Support?

  • Please provide as much information about your project as you can below:
  • TYPE OF PROJECT

  • Request a call back

  • This field is for validation purposes and should be left unchanged.

You may recognise us from...

RHS logo
Wakehurst Logo
Love Your Garden TV Show logo
Future Build logo
RHS Hampton Court Flower Show
Scandia Hus logo
RHS Chelsea Flower Show
DIY SOS logo