Addagrip 1000 System

Concrete Repair System

The Addagrip 1000 System Resin has been specifically developed to treat frost damaged, spalled or smooth concrete airfield pavements, concrete roads, concrete ramps and steps.

The Addagrip 1000 System has been developed to treat top layer as well as ...

The Addagrip 1000 System Resin has been specifically developed to treat frost damaged, spalled or smooth concrete airfield pavements, concrete roads, concrete ramps and steps.

The Addagrip 1000 System has been developed to treat top layer as well as deep damage and to seal small cracks and spalled surfaces on concrete airfield pavements. Applying the Addagrip 1000 System Resin onto the damaged or spalled surfaces of concrete will prevent further deterioration prolonging the life of the concrete.

A major problem with concrete is that deterioration is caused by latent defects, chemical attack and frost damage, which over a period of time causes the top of the concrete to break-down. This breakdown may cause a safety or FOD (Foreign Object Damage) problem requiring removal of the affected areas.

The Addagrip 1000 system seals and protects airfield concrete pavements that are suffering from ASR (alkali-silica reaction) more commonly known as ‘concrete cancer’.

The Addagrip 1000 System Resin applied directly onto the prepared concrete pavement is designed to prevent further deterioration. Areas treated over the last twenty years at military and civil airfields have prevented further deterioration, prolonging the life of the concrete pavement by an estimated 10-15 years.

By sealing and protecting the surface from moisture penetrating the concrete, the deterioration and service life can be extended cost effectively and quickly.

+ Read More

Addagrip 1000 System

Concrete Repair System

The Addagrip 1000 System Resin has been specifically developed to treat frost damaged, spalled or smooth concrete airfield pavements, concrete roads, concrete ramps and steps.

The Addagrip 1000 System has been developed to treat top layer as well as ...

The Addagrip 1000 System Resin has been specifically developed to treat frost damaged, spalled or smooth concrete airfield pavements, concrete roads, concrete ramps and steps.

The Addagrip 1000 System has been developed to treat top layer as well as deep damage and to seal small cracks and spalled surfaces on concrete airfield pavements. Applying the Addagrip 1000 System Resin onto the damaged or spalled surfaces of concrete will prevent further deterioration prolonging the life of the concrete.

A major problem with concrete is that deterioration is caused by latent defects, chemical attack and frost damage, which over a period of time causes the top of the concrete to break-down. This breakdown may cause a safety or FOD (Foreign Object Damage) problem requiring removal of the affected areas.

The Addagrip 1000 system seals and protects airfield concrete pavements that are suffering from ASR (alkali-silica reaction) more commonly known as ‘concrete cancer’.

The Addagrip 1000 System Resin applied directly onto the prepared concrete pavement is designed to prevent further deterioration. Areas treated over the last twenty years at military and civil airfields have prevented further deterioration, prolonging the life of the concrete pavement by an estimated 10-15 years.

By sealing and protecting the surface from moisture penetrating the concrete, the deterioration and service life can be extended cost effectively and quickly.

+ Read More

System features & benefits

Cost Effective

Extends the life of concrete for up to 10 - 20 years.

Improves Skid Resistance

High PSV aggregates can be used for improved skid resistance.

Fast Installation

Minimum disruption.

Protection against fuel spillages and de-icers

Also provides protection to concrete surfaces from jet blast.

This system is best for:

For taxiways, runways, aircraft stands and helipads

Suitable for military and civil airfields.

Concrete Yards - Industrial and Commercial

Repairing spalled concrete yards

Concrete Car Parks and Access Roads

Please note that application process requires the use of a hot compressed air system so may not be suitable for domestic projects and public areas

MAKE SURE YOU GET THE RIGHT RESIN SOLUTION FOR THE JOB

Get in touch to discuss your project

System build-up and technical documents

Resources to help you with your choice of surfacing product

Addagrip 1000 System application diagram

Frequently Asked Questions

Are our resin surfacing systems solvent free?

None of the products used for Addagrip’s Resin Bound or Resin Bonded external surfacing systems contain non-aqueous/non-polar solvents as part of the product formulation, ensuring that they are solvent free. Please note: small quantities of a proprietary solvent mix are offered to contractors to aid in the cleaning of tools and equipment. As this solvent mix will damage the resin surfacing, it is always recommended that tool cleaning is carried out infrequently (i.e. only at the end of application sessions), and in a well ventilated area a suitable distance away from any freshly-laid material.

STILL HAVE QUESTIONS? CALL OUR TEAM OF SPECIALISTS NOW

We are ready to help you with your project

Need Project Support?

  • Please provide as much information about your project as you can below:
  • TYPE OF PROJECT

  • Request a call back

  • This field is for validation purposes and should be left unchanged.

You may recognise us from...

RHS logo
Wakehurst Logo
Love Your Garden TV Show logo
Future Build logo
RHS Hampton Court Flower Show
Scandia Hus logo
RHS Chelsea Flower Show
DIY SOS logo