Providing quality resin surfacing solutions since 1980
Exclusive range of recycled rubber and aggregate resin bound surfacing blends
System features & benefits
Recycled Rubber Content
Available in 50/50 and 75/25 aggregate to recycled rubber ratios.
Lightweight
Great for balconies and roof terraces where weight is a consideration.
Durable
Expected lifespan of up to 10 years depending on surface use.
Low Maintenance
No need to sweep but can be power washed to maintain porosity.
Anti-slip
For safety, provides safety underfoot in wet and dry conditions.
Flexible
Good for tree pits in urban areas.
Porous
Excellent drainage - no surface water
This system is best for:
Footpaths
Low maintenance and comfortable underfoot.
Cycle Paths
Flexibility makes it ideal for cyclists. No loose aggregate.
Woodland Trails
Natural low maintenance walkways with flexibility underfoot.
Golf Courses
Ideal seamless option for pathways and suitable for golf shoes.
Equestrian Centres and Bridle Paths
Flexible, noise absorbing pathway surface suitable for horseshoes.
Cycle Racks and Storage Facilities
Practical, low maintenance for cycle storage and office seating areas.
Tree Pits
As a more flexible alternative to Addastone TP Tree Pit surfacing in Urban schemes.
System build-up and technical documents
Surface Course
Typical depth of Addaflex-R bound surface:
30mm Addaflex-R Recycled Rubber & Aggregate Surface
Binder Course
Not applicable.
Sub Base
A 100mm Depth of well compacted, nonfrost susceptible Type 1 or 3 granular sub-base (dependent on ground conditions) or locally available secondary or recycled aggregates which comply with the requirements of the specifications for Highway works for sub-bases.
Membrane
A geotextile membrane to prevent upward migration of fine soil particles.
Sub Grade
Regulated as required.
Surface Course
50mm Addaflex-R Rubber & Aggregate flexible resin bound surfacing installed up to tree trunk.
Binder Course
Sub Base
25-50mm Loose Aggregate
Membrane
Not required
Sub Grade
Tree pit soil
Take a look at the projects Addaflex-R works best in
Frequently Asked Questions
What’s The Difference Between Resin Bound And Resin Bonded?
There are two different systems that use resin to fix gravel aggregates to create decorative surfacing. These are Resin Bound porous paving and Resin Bonded paving and whilst similar in name they have different properties, application methods and aesthetics. Resin bound surfacing consists of aggregate mixed with resin in specific blends using specific aggregate to resin ratios. The material is trowelled down to a smooth finish similar to a screed (with no loose stones). Depths are specified depending on aggregate size, normally 12mm, 16mm, 18mm or 24mm. Resin bonded surfacing is a scatter system which provides texture and the appearance of loose gravel.
A layer of resin is applied to a suitable surface laid to falls and covered with loose aggregate. Once cured the remaining loose stones are removed. Thickness is governed by aggregate size. i.e. 1-3mm aggregate will have a nominal depth of 4mm.
Is Resin Bound Surfacing SuDS Compliant?
The Addagrip range of Resin Bound surfacing systems are porous and SuDS compliant when installed onto one of our recommended porous base build ups.
Need Project Support?
You may recognise us from...
Awards, Accreditations & Certifications
