Resin bound porous surfacing
Addagrip offers an extensive range of resin bound surfacing systems, each designed to offer a specific paving solution for project types. These systems are porous and offer a smooth, seamless surface with no loose stone, in a natural aggregate ...
Addagrip offers an extensive range of resin bound surfacing systems, each designed to offer a specific paving solution for project types. These systems are porous and offer a smooth, seamless surface with no loose stone, in a natural aggregate finish.
Resin Bound is porous, allowing water to permeate/percolate through the surface and beyond when a suitable base build-up configured for SUDS (Sustainable Urban Drainage Systems) has been installed.
Application of Resin Bound
Resin bound porous surfacing consists of aggregate mixed with resin in selected blends using specific aggregate to resin ratios. The mixed material is trowelled down to a smooth finish similar to a screed (with no loose stones). Depths are specified depending on aggregate size, normally 12mm, 16mm, 18mm or 24mm.
Features and Benefits of Resin Bound Surfacing
- Porous – SuDS compliant when used with porous base build up
- Seamless contemporary finish – hand screeded to smooth finish
- Low maintenance – power wash as required
- Durable – lifespan up to 25 years depending on usage
- Hard wearing – smooth surface, no loose aggregate
- Slip resistant – in wet and dry conditions
- Frost resistant – not affected by freeze thaw action
- Product Guarantee – 5 year warranty, 10 year warranty and up to 25 year warranty depending on product and usage
- BBA approved range – certified since 2016
- EPD certified range – environmental product certification
- Pedestrian and vehicle use – with the appropriate product depth and build up
- Commercial and domestic use – suitable for all project types
The Addagrip range of porous Resin Bound surfacing systems include BBA approved Addaset, Addabound, Terrabound, our no-dig, minimum dig Terrabase patented system, Stonebound and our flexible rubber and aggregate Addaflex-R.
Our Addacolor resin bound system is classed as semi-porous and is not SuDS compliant.
Looking for a non-permeable paving?
The Addastone Plus resin bonded system offers a non-permeable paving providing the look and texture of loose aggregate without the maintenance issues of loose aggregate.
Contact us to speak to a member of our technical team for more information about our resin surfacing systems and find the best fit for your project.
