Case Study
St. Peter’s Church was originally built by Monks in 1220 and is a Grade 1 Listed Building. Given the age of the Church, the pathways were in a state of disrepair. Most of the concrete was broken, cracked, uneven or simply bare earth; all of which had become difficult to walk on, especially when wet… Read more
Case Study
Addagrip approved contractor True Grip Ltd was asked to renovate the existing paths at this historic 12th Century Saxon church in Wisley, near Woking, Surrey. Surfacing requirements The existing loose gravel pathways were in need of repair and the church required a hard standing solution for better access around the grounds. The requirement was for… Read more
Case Study
As part of the plan to upgrade Bramford Gardens, a pocket park near Wandsworth, improvements included reconstruction of the existing separate cycle path and foot path to provide a new shared pedestrian cycle path route, together with repainting of existing railings, planting trees, turfing, renewing signs and installing new benches. Surfacing requirements Wandsworth Borough Council… Read more
Case Study
Addagrip approved contractor ClearPave Surfacing Ltd were appointed by CORMAC to install over 1100sqm of BBA approved Terrabound Resin Bound porous surfacing to the new Barrowfields pedestrian and cycle path along the clifftop at Newquay in Cornwall. The 2.5m wide pathway, which is part of the Council’s wider proposals for the Newquay Cycle Network, provides… Read more
Swatch
Addacolor Black resin bound coloured aggregate decorative surfacing. Available in a 3mm aggregate blend and suitable for creating logos, patterns and decorative paving for light pedestrian use. Please note that this is a semi-porous product.
Swatch
Addacolor Brown resin bound coloured aggregate decorative surfacing. Available in a 3mm aggregate blend and suitable for creating logos, patterns and decorative paving for light pedestrian use. Please note that this is a semi-porous product.
Swatch
Addacolor Buff resin bound coloured aggregate decorative surfacing. Available in a 3mm aggregate blend and suitable for creating logos, patterns and decorative paving for light pedestrian use. Please note that this is a semi-porous product.
Swatch
Addacolor Cloud resin bound coloured aggregate decorative surfacing. Available in a 3mm aggregate blend and suitable for creating logos, patterns and decorative paving for light pedestrian use. Please note that this is a semi-porous product.
Swatch
Addacolor Dark Blue resin bound coloured aggregate decorative surfacing. Available in a 3mm aggregate blend and suitable for creating logos, patterns and decorative paving for light pedestrian use. Please note that this is a semi-porous product.
Swatch
Addacolor Dark Green resin bound coloured aggregate decorative surfacing. Available in a 3mm aggregate blend and suitable for creating logos, patterns and decorative paving for light pedestrian use. Please note that this is a semi-porous product.
Case Study
Addagrip approved contractor Limegate Ltd was appointed to carry out the resurfacing of the existing footpath by the stock pond in Wandsworth Common, situated in the London Borough of Wandsworth, South London. Surfacing requirement The park’s pathways, consisting of old asphalt, were due for replacement and the Council were looking for a porous natural looking… Read more
Swatch
Addacolor Grey resin bound coloured aggregate decorative surfacing. Available in a 3mm aggregate blend and suitable for creating logos, patterns and decorative paving for light pedestrian use. Please note that this is a semi-porous product.
