Datasheet library for resin flooring
WDE 436 Pigmented with Addagrip Bio
Water Based Epoxy Coating (AF-EWDP)
DESCRIPTION
WDE 436 PIGMENTED with Addagrip Bio is a two-part water based epoxy resin coloured coating that incorporates antimicrobial protection based on silver ion technology. Designed as a universal coating for treating cementitious surfaces.
Water Based Epoxy Coating (AF-EWDP)
DESCRIPTION
WDE 436 PIGMENTED with Addagrip Bio is a two-part water based epoxy resin coloured coating that incorporates antimicrobial protection based on silver ion technology. Designed as a universal coating for treating cementitious surfaces.
EP ADDAFLOR with Addagrip Bio High Build Epoxy Coating (AF-EFR)
DESCRIPTION
EP ADDAFLOR with Addagrip Bio is a solvent-free, two-part pigmented epoxy resin coating that incorporates antimicrobial protection, based on silver ion technology. The coating provides an impervious, hard wearing gloss finish with good chemical resistance and wear properties. It has a low odour and is non flammable.
EP ADDAFLOR CR with Addagrip Bio
High Build Epoxy Coating
(AF-EFRCR)
DESCRIPTION
EP ADDAFLOR CR with Addagrip Bio is a solvent-free, two-part pigmented epoxy resin coating that incorporates antimicrobial protection based on silver ion technology. The installed coating provides an impervious, hard wearing gloss finish with very good chemical resistance and wear properties. It has a low odour and is non flammable.
EP ADDAFLOR XFH with Addagrip Bio
High Build Epoxy Coating
(AF-EFRX)
DESCRIPTION
EP ADDAFLOR XFH with Addagrip Bio is a faster curing solvent-free, two-part pigmented epoxy resin coating that incorporates antimicrobial protection based on silver ion technology. The installed coating provides an impervious, hard wearing gloss finish with good chemical resistance and wear properties. It has a low odour and is non
EP ADDAGRIP DECO with Addagrip Bio
(AF-EP-DECO)
DESCRIPTION
EP ADDAGRIP DECO with Addagrip Bio is a solvent-free, two component low viscosity clear epoxy resin which provides an impervious, hard and repellent finish with very good chemical resistance and high yellowing resistance that incorporates antimicrobial protection based on silver ion technology, It has a low odour and is non flammable.
EP ADDALEVEL SL2K with Addagrip Bio
Self Smoothing Epoxy Floor Finish (AF-ELL2K)
DESCRIPTION
EP ADDALEVEL SL2K with Addagrip Bio is a pigmented, seamless flow applied flooring system based on a solvent-free, two-part epoxy resin incorporating special fillers and antimicrobial protection based on silver ion technology. EP ADDALEVEL SL2K with Addagrip Bio provides a gloss surface and is intended for use on new and old concrete floors from a thickness >2mm.
EP ADDASOL SHIELDCOAT with Addagrip Bio
Solvent Based Epoxy (AF-ESCG-5)
DESCRIPTION
EP ADDASOL SHIELDCOAT with Addagrip Bio is a two part, 65% solids, pigmented solvent based epoxy resin using a Xylene and Xylene/n-Butanol solvent mix that incorporates antimicrobial protection based on silver ion technology.
DESCRIPTION
EP ADDAFLOR with Addagrip Bio is a solvent-free, two-part pigmented epoxy resin coating that incorporates antimicrobial protection, based on silver ion technology. The coating provides an impervious, hard wearing gloss finish with good chemical resistance and wear properties. It has a low odour and is non flammable.
EP ADDAFLOR CR with Addagrip Bio
High Build Epoxy Coating
(AF-EFRCR)
DESCRIPTION
EP ADDAFLOR CR with Addagrip Bio is a solvent-free, two-part pigmented epoxy resin coating that incorporates antimicrobial protection based on silver ion technology. The installed coating provides an impervious, hard wearing gloss finish with very good chemical resistance and wear properties. It has a low odour and is non flammable.
EP ADDAFLOR XFH with Addagrip Bio
High Build Epoxy Coating
(AF-EFRX)
DESCRIPTION
EP ADDAFLOR XFH with Addagrip Bio is a faster curing solvent-free, two-part pigmented epoxy resin coating that incorporates antimicrobial protection based on silver ion technology. The installed coating provides an impervious, hard wearing gloss finish with good chemical resistance and wear properties. It has a low odour and is non
EP ADDAGRIP DECO with Addagrip Bio
(AF-EP-DECO)
DESCRIPTION
EP ADDAGRIP DECO with Addagrip Bio is a solvent-free, two component low viscosity clear epoxy resin which provides an impervious, hard and repellent finish with very good chemical resistance and high yellowing resistance that incorporates antimicrobial protection based on silver ion technology, It has a low odour and is non flammable.
EP ADDALEVEL SL2K with Addagrip Bio
Self Smoothing Epoxy Floor Finish (AF-ELL2K)
DESCRIPTION
EP ADDALEVEL SL2K with Addagrip Bio is a pigmented, seamless flow applied flooring system based on a solvent-free, two-part epoxy resin incorporating special fillers and antimicrobial protection based on silver ion technology. EP ADDALEVEL SL2K with Addagrip Bio provides a gloss surface and is intended for use on new and old concrete floors from a thickness >2mm.
EP ADDASOL SHIELDCOAT with Addagrip Bio
Solvent Based Epoxy (AF-ESCG-5)
DESCRIPTION
EP ADDASOL SHIELDCOAT with Addagrip Bio is a two part, 65% solids, pigmented solvent based epoxy resin using a Xylene and Xylene/n-Butanol solvent mix that incorporates antimicrobial protection based on silver ion technology.
EP Addaflow
High Build Epoxy Coating
(AF-EFW)
DESCRIPTION
EP Addaflow is a solvent-free, two-part pigmented epoxy resin coating which provides an impervious, hard wearing gloss finish with good chemical resistance and wear properties. It has a low odour and is non flammable.
EP Addaflow CR
High Build Epoxy Coating (AF-EFWCR)
DESCRIPTION
EP Addaflow CR is a solvent-free, two-part pigmented epoxy resin coating which provides an impervious, hard wearing gloss finish with very good chemical resistance and wear properties. It has a low odour and is non flammable.
WDE 436 Pigmented
Water Based Epoxy Coating
(AF-EWDP)
DESCRIPTION
WDE 436 Pigmented is a two-part water based epoxy resin coloured coating designed as a universal coating for treating cementitious surfaces.
EP Addasol Shieldcoat
Solvent Based Epoxy
(AF-ESCG-5)
DESCRIPTION
EP Addasol Shieldcoat is a two part, 65% solids, pigmented solvent based epoxy resin using a Xylene and Xylene/n-Butanol solvent mix.
EP Addalevel SL2K
Self Smoothing Epoxy Floor Finish
(AF-EEL2K)
DESCRIPTION
EP Addalevel SL2K is a pigmented, seamless flow applied flooring system based on a solvent-free, two-part epoxy resin incorporating special fillers. EP Addalevel SL2K provides a gloss surface and is intended for use on new and old concrete floors for thickness >2mm.
EP Addalevel SLF-1
Self Smoothing Flexible Epoxy Finish Base Coat (AF-ELLF1)
DESCRIPTION
EP Addalevel SLF is a solvent-free, two-part pigmented flexible epoxy resin supplied in two grades:
EP Addalevel SLF-1 (Base Coat 50% Elongation)
EP Addalevel SLF-2 (Top Coat 26% Elongation)
The flexible system offers many advantages over traditional rigid epoxy self levelling systems:
• Improved impact resistance and protection
• Crack bridging properties
• The ability to absorb stress within the surface layer preventing premature failure at the interface
• Can be applied on to asphalt
• Good noise reduction factors.
EP Addalevel SLF-2
Self Smoothing Flexible Epoxy Finish Top Coat (AF-ELLF2)
DESCRIPTION
EP Addalevel SLF is a solvent-free, two-part pigmented flexible epoxy resin supplied in two grades:
EP Addalevel SLF-1 (Base Coat 50% Elongation)
EP Addalevel SLF-2 (Top Coat 26% Elongation)
The flexible system offers many advantages over traditional rigid epoxy self levelling systems:
• Improved impact resistance and protection
• Crack bridging properties
• The ability to absorb stress within the surface layer preventing
premature failure at the interface
• Can be applied on to asphalt
• Good noise reduction factors.
EP Addagrip DECO
(AF-EP-DECO)
DESCRIPTION
EP ADDAGRIP DECO is a solvent-free, two component low viscosity clear epoxy resin which provides an impervious, hard and repellent finish with very good chemical resistance and high yellowing resistance. It has a low odour and is non flammable.
Addagrip EHP Water Based Primer
(AP-EHP)
DESCRIPTION
ADDAGRIP EHP is a two component water based
epoxy compatible with wet/humid substrates.
High Build Epoxy Coating
(AF-EFW)
DESCRIPTION
EP Addaflow is a solvent-free, two-part pigmented epoxy resin coating which provides an impervious, hard wearing gloss finish with good chemical resistance and wear properties. It has a low odour and is non flammable.
EP Addaflow CR
High Build Epoxy Coating (AF-EFWCR)
DESCRIPTION
EP Addaflow CR is a solvent-free, two-part pigmented epoxy resin coating which provides an impervious, hard wearing gloss finish with very good chemical resistance and wear properties. It has a low odour and is non flammable.
WDE 436 Pigmented
Water Based Epoxy Coating
(AF-EWDP)
DESCRIPTION
WDE 436 Pigmented is a two-part water based epoxy resin coloured coating designed as a universal coating for treating cementitious surfaces.
EP Addasol Shieldcoat
Solvent Based Epoxy
(AF-ESCG-5)
DESCRIPTION
EP Addasol Shieldcoat is a two part, 65% solids, pigmented solvent based epoxy resin using a Xylene and Xylene/n-Butanol solvent mix.
EP Addalevel SL2K
Self Smoothing Epoxy Floor Finish
(AF-EEL2K)
DESCRIPTION
EP Addalevel SL2K is a pigmented, seamless flow applied flooring system based on a solvent-free, two-part epoxy resin incorporating special fillers. EP Addalevel SL2K provides a gloss surface and is intended for use on new and old concrete floors for thickness >2mm.
EP Addalevel SLF-1
Self Smoothing Flexible Epoxy Finish Base Coat (AF-ELLF1)
DESCRIPTION
EP Addalevel SLF is a solvent-free, two-part pigmented flexible epoxy resin supplied in two grades:
EP Addalevel SLF-1 (Base Coat 50% Elongation)
EP Addalevel SLF-2 (Top Coat 26% Elongation)
The flexible system offers many advantages over traditional rigid epoxy self levelling systems:
• Improved impact resistance and protection
• Crack bridging properties
• The ability to absorb stress within the surface layer preventing premature failure at the interface
• Can be applied on to asphalt
• Good noise reduction factors.
EP Addalevel SLF-2
Self Smoothing Flexible Epoxy Finish Top Coat (AF-ELLF2)
DESCRIPTION
EP Addalevel SLF is a solvent-free, two-part pigmented flexible epoxy resin supplied in two grades:
EP Addalevel SLF-1 (Base Coat 50% Elongation)
EP Addalevel SLF-2 (Top Coat 26% Elongation)
The flexible system offers many advantages over traditional rigid epoxy self levelling systems:
• Improved impact resistance and protection
• Crack bridging properties
• The ability to absorb stress within the surface layer preventing
premature failure at the interface
• Can be applied on to asphalt
• Good noise reduction factors.
EP Addagrip DECO
(AF-EP-DECO)
DESCRIPTION
EP ADDAGRIP DECO is a solvent-free, two component low viscosity clear epoxy resin which provides an impervious, hard and repellent finish with very good chemical resistance and high yellowing resistance. It has a low odour and is non flammable.
Addagrip EHP Water Based Primer
(AP-EHP)
DESCRIPTION
ADDAGRIP EHP is a two component water based
epoxy compatible with wet/humid substrates.
EP Addaprime
Solvent Free Epoxy Primer
(AP-EPR)
DESCRIPTION
EP Addaprime is a solvent free, two-part, 100% solids, high build epoxy primer. Designed as a universal primer for treating concrete floors, its low viscosity offers maximum penetration and adhesion qualities. For improved chemical resistance use EP ADDAPRIME CR or for rapid cure use EP ADDAPRIME XFH.
EP Addaprime CR
Solvent Free Chemical Resistant Epoxy Primer (AP-EPRCR)
DESCRIPTION
EP Addaprime CR is a solvent free, chemical resistant, two-part, 100% solids, high build epoxy primer. Designed as a universal primer for treating concrete floors, its low viscosity offers maximum penetration and adhesion qualities.
EP Addaprime XFH
Solvent Free Fast Cure Epoxy Primer (AP-EPRX)
DESCRIPTION
EP Addaprime XFH is a fast curing solvent free, two-part, 100% solids, high build epoxy primer. Designed as a universal primer for treating concrete floors, its low viscosity offers maximum penetration and adhesion qualities. For improved chemical resistance use EP ADDAPRIME CR.
WDE 436 Primer
Water Based Epoxy Primer
(AP-WDEPR)
DESCRIPTION
WDE 436 Primer is a two-part water based epoxy resin primer designed as a universal primer coat on cementitious surfaces.
WDE 436 Primer AP
Water Based Epoxy Primer with increased adhesion qualities
(AP-WDEAPR)
DESCRIPTION
WDE 436 Primer AP is a two-part water based epoxy resin primer designed as a universal primer coat for treating ceramic tiles and cementitious surfaces.
PU Addaseal Primer
Polyurethane Primer (AS-SLS)
DESCRIPTION
PU Addaseal is a 60% solids, single pack moisture cured polyurethane primer designed to seal concrete surfaces.
EP DPM Primer AG
Damp Proof Membrane (AP-DPM)
DESCRIPTION
EP DPM Primer AG is a solvent-free, two-part concrete primer giving excellent adhesion on damp concrete. Approved to EN 1504-2 for compatibility with wet concrete.
EP Addasol Shieldcoat Primer
Solvent Based Primer
(AP-SCPR-5)
DESCRIPTION
EP Addasol Shieldcoat Primer is a two part, 62% solids, solvent based epoxy resin using a Xylene and Xylene/n-Butanol solvent mix.
EP Addaflor
High Build Epoxy Coating
(AF-EFR)
DESCRIPTION
EP Addaflor is a solvent-free, two-part pigmented epoxy resin coating which provides an impervious, hard wearing gloss finish with good chemical resistance and wear properties. It has a low odour and is non flammable.
EP Addaflor XFH
High Build Epoxy Coating
(AF-EFRX)
DESCRIPTION
EP Addaflor XFH is a faster curing solvent-free, two-part pigmented epoxy resin coating which provides an impervious, hard wearing gloss finish with good chemical resistance and wear properties. It has a low odour and is non flammable.
EP Addaflor CR
High Build Epoxy Coating
(AF-EFRCR)
DESCRIPTION
EP Addaflor CR is a solvent-free, two-part pigmented epoxy resin coating which provides an impervious, hard wearing gloss finish with very good chemical resistance and wear properties. It has a low odour and is non flammable.
Solvent Free Epoxy Primer
(AP-EPR)
DESCRIPTION
EP Addaprime is a solvent free, two-part, 100% solids, high build epoxy primer. Designed as a universal primer for treating concrete floors, its low viscosity offers maximum penetration and adhesion qualities. For improved chemical resistance use EP ADDAPRIME CR or for rapid cure use EP ADDAPRIME XFH.
EP Addaprime CR
Solvent Free Chemical Resistant Epoxy Primer (AP-EPRCR)
DESCRIPTION
EP Addaprime CR is a solvent free, chemical resistant, two-part, 100% solids, high build epoxy primer. Designed as a universal primer for treating concrete floors, its low viscosity offers maximum penetration and adhesion qualities.
EP Addaprime XFH
Solvent Free Fast Cure Epoxy Primer (AP-EPRX)
DESCRIPTION
EP Addaprime XFH is a fast curing solvent free, two-part, 100% solids, high build epoxy primer. Designed as a universal primer for treating concrete floors, its low viscosity offers maximum penetration and adhesion qualities. For improved chemical resistance use EP ADDAPRIME CR.
WDE 436 Primer
Water Based Epoxy Primer
(AP-WDEPR)
DESCRIPTION
WDE 436 Primer is a two-part water based epoxy resin primer designed as a universal primer coat on cementitious surfaces.
WDE 436 Primer AP
Water Based Epoxy Primer with increased adhesion qualities
(AP-WDEAPR)
DESCRIPTION
WDE 436 Primer AP is a two-part water based epoxy resin primer designed as a universal primer coat for treating ceramic tiles and cementitious surfaces.
PU Addaseal Primer
Polyurethane Primer (AS-SLS)
DESCRIPTION
PU Addaseal is a 60% solids, single pack moisture cured polyurethane primer designed to seal concrete surfaces.
EP DPM Primer AG
Damp Proof Membrane (AP-DPM)
DESCRIPTION
EP DPM Primer AG is a solvent-free, two-part concrete primer giving excellent adhesion on damp concrete. Approved to EN 1504-2 for compatibility with wet concrete.
EP Addasol Shieldcoat Primer
Solvent Based Primer
(AP-SCPR-5)
DESCRIPTION
EP Addasol Shieldcoat Primer is a two part, 62% solids, solvent based epoxy resin using a Xylene and Xylene/n-Butanol solvent mix.
EP Addaflor
High Build Epoxy Coating
(AF-EFR)
DESCRIPTION
EP Addaflor is a solvent-free, two-part pigmented epoxy resin coating which provides an impervious, hard wearing gloss finish with good chemical resistance and wear properties. It has a low odour and is non flammable.
EP Addaflor XFH
High Build Epoxy Coating
(AF-EFRX)
DESCRIPTION
EP Addaflor XFH is a faster curing solvent-free, two-part pigmented epoxy resin coating which provides an impervious, hard wearing gloss finish with good chemical resistance and wear properties. It has a low odour and is non flammable.
EP Addaflor CR
High Build Epoxy Coating
(AF-EFRCR)
DESCRIPTION
EP Addaflor CR is a solvent-free, two-part pigmented epoxy resin coating which provides an impervious, hard wearing gloss finish with very good chemical resistance and wear properties. It has a low odour and is non flammable.
Addagrip Surface Treatments UK Limited
Addagrip House
Bell Lane Industrial Estate
Uckfield
East Sussex TN22 1QL
Telephone: 01825 761333
Fax: 01825 768566
email: sales@addagrip.co.uk
Addagrip House
Bell Lane Industrial Estate
Uckfield
East Sussex TN22 1QL
Telephone: 01825 761333
Fax: 01825 768566
email: sales@addagrip.co.uk
Addagrip Surface Treatments UK Ltd is a company registered in England Registered No. 1492055 Vat No. GB 315993925
Click here for our new
16 page brochure
16 page brochure
