Resin Bonded or Resin Bound?
Resin Bound (Addaset)
In resin bound surfacing the aggregate is mixed with the three part resin. The material is then trowelled down to a smooth finish similar to a screed (with no loose stones). Depths are specified depending on use, normally 15mm or 18mm.
In resin bound surfacing the aggregate is mixed with the three part resin. The material is then trowelled down to a smooth finish similar to a screed (with no loose stones). Depths are specified depending on use, normally 15mm or 18mm.
There are two different systems that use resin to fix gravel aggregates. These are:
Resin Bonded (Addastone)
Resin bonded surfacing is a scatter system which provides texture and the appearance of loose gravel.
A layer of resin applied to a suitable surface and covered with loose aggregate. Once cured the remaining loose stones are removed. Thickness is governed by aggregate size. i.e. 1-3mm aggregate will have a nominal depth of 3mm.
Resin bonded surfacing is a scatter system which provides texture and the appearance of loose gravel.
A layer of resin applied to a suitable surface and covered with loose aggregate. Once cured the remaining loose stones are removed. Thickness is governed by aggregate size. i.e. 1-3mm aggregate will have a nominal depth of 3mm.
Click here for our new
16 page brochure
16 page brochure
Click here for an addaset case study
Click here for an addastone case study
Click here for our new
16 page brochure
16 page brochure
Addagrip Surface Treatments UK Limited
Addagrip House
Bell Lane Industrial Estate
Uckfield
East Sussex TN22 1QL
Telephone: 01825 761333
Fax: 01825 768566
email: sales@addagrip.co.uk
Addagrip House
Bell Lane Industrial Estate
Uckfield
East Sussex TN22 1QL
Telephone: 01825 761333
Fax: 01825 768566
email: sales@addagrip.co.uk
Addagrip Surface Treatments UK Ltd is a company registered in England Registered No. 1492055 Vat No. GB 315993925
